Images may be inaccurate. See specs below to ensure accuracy.
Product Description
68 Gallon Marine & RV Tank | Holding & Fresh Water | Trionic WH-2068-1
The 68 Gallon Trionic Marine & RV Tank (Holding & Fresh Water) | WH-2068-1 is engineered for compact installations in boats, RVs, and other mobile applications where a durable, space-efficient polyethylene tank is required. This rectangular, one-piece rotationally molded tank is suitable for potable/freshwater storage as well as wastewater holding (including grey and black water) in non-pressurized setups.
This product is offered in two configurations: Pre-Drilled (factory threaded ports) or Blank (undrilled for custom fitting placement). The Pre-Drilled option includes (2) 1-1/2" FPT and (2) 1/2" FPT female NPT threaded openings located on one end (unused openings can be capped). The tank is approximately 3/8" average wall thickness and should be installed with the bottom fully supported; Trionic recommends using a minimum 12" flexible hose section to hose barb fittings for installation. For blank-tank/custom routing needs, the DIY CF-60 Custom Fittings Kit supports common fitting components and installation guidance.
Features
-
Product Type: Marine & RV Tank (Holding & Fresh Water)
-
Model: Trionic WH-2068-1 (Pre-Drilled) / B-2068-1 (Blank Option)
-
Capacity: 68 Gallon
-
Tank Shape: Rectangular
-
Usability: Portable
-
Environment: Above Ground
-
Pressurized Use: No
-
ANSI / NSF 61 Approved Resin: Yes
-
Dimensions: 36" L × 23" W × 19" H
-
Material / Color: Polyethylene, Natural White
Specifications
KEY SPECIFICATIONS
- Product Type: Marine & RV Tank (Holding & Fresh Water)
- Model: Trionic WH-2068-1
- Fitting Options: Pre-Drilled Tank (WH-2068-1) or Blank Tank (B-2068-1)
- Capacity: 68 Gallon
- Tank Shape: Rectangular
- Usability: Portable
- Environment: Above Ground
- Pressurized Use: No
- Dimensions: 36" Length × 23" Width × 19" Height
- Material: Polyethylene
- Color: Natural White
- ANSI / NSF 61 Approved Resin: Yes
- Marine Reference: Meets U.S. Coast Guard regulations (as applicable)
- Openings (Pre-Drilled Option): (2) 1-1/2" FPT and (2) 1/2" FPT threaded openings (located on one end)
- Thread Type: Female NPT (National Pipe Thread)
- Wall Thickness: 3/8" average
- Compatible Accessory: DIY CF-60 Custom Fittings Kit (for custom fitting placement/blank-tank applications)
- Warranty: 1-year (materials and workmanship)
COMPLIANCE REFERENCES
- NSF/ANSI 61 – Drinking Water System Components (Health Effects)
- FDA – 21 CFR § 177.1520 (Olefin Polymers; Polyethylene Resin Reference)
- USCG – 33 CFR Part 159 (Marine Sanitation Devices)
- NFPA 1192 – Standard on Recreational Vehicles
SHIPPING INFORMATION
- Freight Class: TBD
- Liftgate Option: Yes
- Locations: Wisconsin
- Zip Codes: 53021
