Galvanized steel water tanks from 90 to 3,750 gallons for drinking water, well water and general storage above ground. Texas Metal Tanks lines each G-90 galvanized tank with a paint and epoxy interior that is NSF 61 certified and FDA compliant.
When you want a steel cistern that holds drinking water and looks at home beside a house or barn, galvanized is the practical choice. Every tank here comes from Texas Metal Tanks, riveted from G-90 galvanized steel, lined inside and tested watertight at the factory.
The paint and epoxy lining goes on after the tank is built and keeps your water off the steel. It is NSF 61 certified and FDA compliant, so the tank can hold drinking water when it's installed and used as specified.
Each tank comes set up for water storage, with two poly bulkhead fittings on one side: a low one for drawing water and a higher one on the sidewall. If a well fills it, Texas Metal Tanks suggests letting your well driller make the connection, and you can ask for a larger outlet if you'll pump from the tank.
Galvanized steel suits most water storage above ground. If service life and corrosion resistance come first, stainless steel lasts longer and carries a longer warranty, and Texas Metal Tanks Explained compares the two.
Every Texas Metal Tanks model is made to order. Check the diameter and height against your site, and set the tank on a level base that supports the whole bottom, such as tamped crushed granite or a concrete pad. Pick your capacity below, and request a quote for a larger outlet or a size we don't list. Catching rain off a roof? The same tanks come in a rainwater setup in rainwater collection tanks.