Images may be inaccurate. See specs below to ensure accuracy.
Product Description
The 75 gallon Peabody ProChem 30 Degree Cone Bottom Tank with Plastic Stand drains completely, which is what batching, mixing and slurry service demand. The cone slope keeps solids and viscous liquids moving toward the outlet, and a large vented twist lid is standard.
Measuring 24" diameter x 54.5" high, this ProChem 30 Degree Cone Bottom Tank with Plastic Stand holds 75 gallons.
MATERIAL OPTIONS
- LPE 1.5 — Part No.: 01-36462 (NSF/ANSI 61 certified resin)
- LPE 1.9 — Part No.: 01-36463 (NSF/ANSI 61 certified resin)
- XLPE — Part No.: 01-36464 (NSF/ANSI 61 certified resin)
- FDA 1.0 — Part No.: 01-36465 (NSF/ANSI 61 certified resin)
FEATURES
- Cone bottom drains fully: built for batching, mixing and complete drain-down
- Steeper slopes move solids and viscous liquids better
- Standard duty 1.5 and heavy duty 1.9 specific gravity walls; XLPE available
- Large vented twist lid standard; drain and process fittings sold separately
- Steel, stainless and fiberglass stands available in standard and seismic designs
- NSF/ANSI/CAN 61 certified resins available
MATERIAL SELECTION GUIDANCE
Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.
These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.
CHEMICAL COMPATIBILITY RESOURCES
- Peabody Chemical Resistance Chart (PDF)
- Polyethylene Chemical Resistance Chart (PDF)
- Polypropylene Chemical Resistance Chart (PDF)
- Chemical Compatibility Tool
Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.
Specifications
KEY SPECIFICATIONS
- Product Type: ProChem 30 Degree Cone Bottom Tank with Plastic Stand
- Tank Shape: Cylindrical
- Pressurized Use: No
- Capacity: 75 Gallons
- Dimensions: 24" diameter x 54.5" high
- Material: LPE 1.5 (01-36462)
- Material: LPE 1.9 (01-36463)
- Material: XLPE (01-36464)
- Material: FDA 1.0 (01-36465)
- Color: Natural
- ANSI/NSF 61 Approved Resin: Yes
- Manufacturer: Peabody Engineering
- Manufacturer Part Number: 01-36462 / 01-36463 / 01-36464 / 01-36465
SHIPPING INFORMATION
- Freight Class: 250
- Locations: Liberty, South Carolina
- Zip Codes: 29657
WARRANTY TERMS
Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.
Custom and Made to Order products are not returnable
