575 Gallon Peabody ProChem Process Chemical Tank

Product Description

The 575 gallon Peabody ProChem Process Chemical Tank is a single-wall polyethylene tank built for day-tank duty in chemical feed, water treatment and agricultural systems. It arrives with a vented access lid, molded-in calibration in gallons and litres, and a molded pump platform on top so a metering pump can sit directly over the tank. Pick the resin and wall rating that matches your chemical.

Measuring 64" diameter x 48" high, this ProChem Process Chemical Tank holds 575 gallons and opens through a 16 in lid.

MATERIAL OPTIONS

• LPE 1.5 — Part No.: 01-35497 (NSF/ANSI 61 certified resin)
• LPE 1.9 — Part No.: 01-35498 (NSF/ANSI 61 certified resin)
• XLPE 1.5 — Part No.: 01-35682 (NSF/ANSI 61 certified resin)
• XLPE 1.9 — Part No.: 01-35499 (NSF/ANSI 61 certified resin)

FEATURES

• Integrally molded pump mounting platform on top, rated for pumps up to 225 lb on sizes through 300 gallons
• Vented threaded access lid with molded-in calibration in both gallons and litres
• Standard top process fittings for fill, discharge and level sensing on 300 gallon and smaller tanks
• Available in 1.5 or 1.9 specific gravity walls, in LPE, XLPE, polypropylene or polyvinylidene fluoride (PVDF)
• LPE tanks are NSF/ANSI/CAN 61 certified for potable water; XLPE is certified from 40 gallons up
• Seismic and wind restraint, agitation and process connection options available

MATERIAL SELECTION GUIDANCE

Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.

These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.

CHEMICAL COMPATIBILITY RESOURCES

• Peabody Chemical Resistance Chart (PDF)
• Polyethylene Chemical Resistance Chart (PDF)
• Polypropylene Chemical Resistance Chart (PDF)
• Chemical Compatibility Tool

Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.