Images may be inaccurate. See specs below to ensure accuracy.
Product Description
The 50 gallon Peabody ProChem Open Top Rectangular Tank is an open-top rectangular vessel for dipping, soaking, plating and parts washing, where an operator has to reach the whole tank. Wall thickness is matched to the size, and the smaller tanks ship with their cover included.
Measuring 23.12" L x 23.75" W x 16.75" H, this ProChem Open Top Rectangular Tank holds 50 gallons.
MATERIAL OPTIONS
- Standard — Part No.: 01-35126
FEATURES
- Full open top for dipping, soaking and parts handling
- Wall thickness sized to the tank, from 3/16 inch up to 3/8 inch
- Covers included on the small sizes and sold separately on the larger ones
- One-piece molded polyethylene: no seams, no corrosion
MATERIAL SELECTION GUIDANCE
Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.
These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.
CHEMICAL COMPATIBILITY RESOURCES
- Peabody Chemical Resistance Chart (PDF)
- Polyethylene Chemical Resistance Chart (PDF)
- Polypropylene Chemical Resistance Chart (PDF)
- Chemical Compatibility Tool
Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.
Specifications
KEY SPECIFICATIONS
- Product Type: ProChem Open Top Rectangular Tank
- Tank Shape: Rectangular
- Pressurized Use: No
- Capacity: 50 Gallons
- Dimensions: 23.12" L x 23.75" W x 16.75" H
- Manufacturer: Peabody Engineering
- Manufacturer Part Number: 01-35126
SHIPPING INFORMATION
- Freight Class: 250
- Locations: Liberty, South Carolina
- Zip Codes: 29657
WARRANTY TERMS
Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.
Custom and Made to Order products are not returnable
