Images may be inaccurate. See specs below to ensure accuracy.
Product Description
The 240 gallon Peabody Gemini Square Tank Value-Pak bundles a Gemini dual containment tank with the lid, fittings and accessories that turn it into a working chemical feed station. Silver adds the pump pedestal, quick-connect fill, suction tube and a float level gauge, Gold adds a bottom drain and a hold-down restraint and swaps the float gauge for a level indicator, and Platinum adds leak detection and an electronic level sensor.
Measuring 46" L x 46" W x 43.38" H, this Gemini Square Tank Value-Pak holds 240 gallons.
WHAT EACH PACKAGE INCLUDES
Silver — Part No.: 293-36102
- Plastic fittings in your choice of PVC or polypropylene
- Stainless steel float level gauge
- Pump Pup pedestal that raises your pump for an easy suction connection (pump not included)
- 1" quick-connect fill with a male cam adapter, dust cap and lanyard
- Gemini pump suction tube with foot valve
- 3P document protector for SDS and safety sheets on the tank side
- CAD submittal drawings
- Plastic wrap and palletizing for transit
Gold — Part No.: 293-36103
Everything in Silver except the stainless steel float level gauge, plus:
- 1" double-wall bulkhead bottom drain fitting, installed
- Mini inverse level indicator with a 2" wide calibration board
- Non-code FiberRing restraint system
Platinum — Part No.: 293-36104
Everything in Gold except the 1" double-wall bulkhead bottom drain fitting, plus:
- 1" double-wall welded bottom drain fitting
- Interstitial leak detection sensor (alarm box sold separately)
- Submersible level sensor with display and 4-20 mA signal output, 24 VDC powered
FEATURES
- Gemini tank-in-a-tank containment supplied as a packaged system
- PVC or polypropylene plastic fittings that won't corrode or rust
- Silver, Gold and Platinum package levels
MATERIAL SELECTION GUIDANCE
Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.
These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.
CHEMICAL COMPATIBILITY RESOURCES
- Peabody Chemical Resistance Chart (PDF)
- Polyethylene Chemical Resistance Chart (PDF)
- Polypropylene Chemical Resistance Chart (PDF)
- Chemical Compatibility Tool
Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.
Specifications
KEY SPECIFICATIONS
- Product Type: Gemini Square Tank Value-Pak
- Tank Shape: Square
- Pressurized Use: No
- Capacity: 240 Gallons
- Dimensions: 46" L x 46" W x 43.38" H
- Manufacturer: Peabody Engineering
- Manufacturer Part Number: 293-36102 / 293-36103 / 293-36104
SHIPPING INFORMATION
- Freight Class: 250
- Locations: Liberty, South Carolina
- Zip Codes: 29657
WARRANTY TERMS
Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.
Custom and Made to Order products are not returnable
