Images may be inaccurate. See specs below to ensure accuracy.
Product Description
The 160 gallon Peabody Gemini Round Waste Oil Tank collects used oil in a double-wall tank: a black primary inside a translucent safety-yellow containment shell that makes the level and any leak obvious from across the bay. It is built for quick-lube shops, dealerships and fleet maintenance departments.
Measuring 34" diameter x 68" high, this Gemini Round Waste Oil Tank holds 160 gallons.
MATERIAL OPTIONS
- LPE SD 1.5, Yellow Outer / Black Inner — Part No.: 01-35087 (NSF/ANSI 61 certified resin)
FEATURES
- Tank-in-a-tank construction exceeds EPA 40 CFR secondary containment requirements
- Black inner tank inside a translucent safety yellow outer shell for visual inspection
- Vented locking top lid with a sediment screen
- 2 inch top suction pipe with a hose quick connect fitting, cap and lanyard
- Secondary containment top drain with dip tube and plug
- Optional stainless steel float-type level gauge
MATERIAL SELECTION GUIDANCE
Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.
These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.
CHEMICAL COMPATIBILITY RESOURCES
- Peabody Chemical Resistance Chart (PDF)
- Polyethylene Chemical Resistance Chart (PDF)
- Polypropylene Chemical Resistance Chart (PDF)
- Chemical Compatibility Tool
Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.
Specifications
KEY SPECIFICATIONS
- Product Type: Gemini Round Waste Oil Tank
- Tank Shape: Cylindrical
- Pressurized Use: No
- Capacity: 160 Gallons
- Dimensions: 34" diameter x 68" high
- Material: LPE SD 1.5
- Color: Yellow Outer / Black Inner
- ANSI/NSF 61 Approved Resin: Yes
- Manufacturer: Peabody Engineering
- Manufacturer Part Number: 01-35087
SHIPPING INFORMATION
- Freight Class: 250
- Locations: Liberty, South Carolina
- Zip Codes: 29657
WARRANTY TERMS
Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.
Custom and Made to Order products are not returnable
