Images may be inaccurate. See specs below to ensure accuracy.
Product Description
The 15 gallon Peabody ProChem Open Top Process Chemical Tank is a cylindrical day tank with its lid included, for chemical process work where the operator needs to get inside the tank. Molded-in calibration on a flat sidewall panel reads the level in gallons and litres.
Measuring 15" diameter x 25.26" high, this ProChem Open Top Process Chemical Tank holds 15 gallons and opens through a 18.625 in lid.
MATERIAL OPTIONS
- LPE 1.5 — Part No.: 01-28961 (NSF/ANSI 61 certified resin)
- LPE 1.9 — Part No.: 01-31415 (NSF/ANSI 61 certified resin)
- XLPE — Part No.: 01-30400
- PPL — Part No.: 01-29058
- PVDF — Part No.: 01-29071
FEATURES
- Lid included; overall height is measured from the floor to the top of the lid
- Flat calibrated sidewall panel reads in gallons and litres
- LPE certified to NSF/ANSI/CAN 61 in all sizes; XLPE from 55 to 500 gallons
- Natural is standard, with Gemini blue and black available, plus polypropylene and polyvinylidene fluoride (PVDF) to order
- The listed diameter excludes the top rim flange
MATERIAL SELECTION GUIDANCE
Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.
These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.
CHEMICAL COMPATIBILITY RESOURCES
- Peabody Chemical Resistance Chart (PDF)
- Polyethylene Chemical Resistance Chart (PDF)
- Polypropylene Chemical Resistance Chart (PDF)
- Chemical Compatibility Tool
Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.
Specifications
TECHNICAL DRAWINGS & GUIDES
Technical Drawing: View Technical Drawing
KEY SPECIFICATIONS
- Product Type: ProChem Open Top Process Chemical Tank
- Tank Shape: Cylindrical
- Pressurized Use: No
- Capacity: 15 Gallons
- Dimensions: 15" diameter x 25.26" high
- Material: LPE 1.5 (01-28961)
- Material: LPE 1.9 (01-31415)
- Material: XLPE (01-30400)
- Material: PPL (01-29058)
- Material: PVDF (01-29071)
- Color: Natural
- ANSI/NSF 61 Approved Resin: No
- Manufacturer: Peabody Engineering
- Manufacturer Part Number: 01-28961 / 01-31415 / 01-30400 / 01-29058 / 01-29071
SHIPPING INFORMATION
- Freight Class: 250
- Locations: Liberty, South Carolina
- Zip Codes: 29657
WARRANTY TERMS
Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.
Custom and Made to Order products are not returnable
