Images may be inaccurate. See specs below to ensure accuracy.
Product Description
The Texas Metal Tanks 1,000 Gallon Galvanized Vertical Rainwater Collection Tank is an above-ground, stationary tank built for rainwater harvesting and non-pressurized water storage. Manufactured from G-90 galvanized steel with a 20 gauge body and bottom, and 22 gauge top. After construction, the interior receives a paint and epoxy lining that is FDA approved for potable water and ANSI/NSF 61 certified. Each tank is factory-tested for watertight performance and backed by a 1-year manufacturer warranty.
Rainwater Collection (RW) configuration: This model is set up for rainwater harvesting. It includes a basket inlet in the top of the tank, a 3-inch or 4-inch overflow, and a 3/4-inch female NPT bulkhead outlet for draw-off.
Key details:
- Material: G-90 Galvanized Steel (US-made), 20 gauge body and bottom, 22 gauge top, riveted assembly
- Interior finish: Paint and epoxy lining, FDA approved for potable water, ANSI/NSF 61 certified
- Configuration: RW (Rainwater Collection). Basket inlet, overflow, and 3/4 inch NPT outlet.
- Fitting type: All fittings are poly bulkhead fittings, not welded metal. Includes basket inlet, 3" or 4" overflow, and 3/4" female NPT outlet for draw-off.
- Dimensions: 5'6" x 5'8" (66" x 68"), measured to top of sidewall
- Estimated weight: 325 lbs
- Use: Above-ground, stationary, non-pressurized
- Potable water: Yes, suitable for drinking water when installed and used as specified
- Expected service life: 20 to 30 years
- Warranty: 1-year manufacturer warranty
- Packaging: $75 packaging fee for tanks up to 1,000 gallons. For tanks over 1,000 gallons, contact us if palletizing is required.
Model legend: Texas Metal Tanks uses two configuration codes. WS = Water Storage (two poly bulkhead fittings, one lower and one upper). RW = Rainwater Collection (basket inlet, overflow, and 3/4 inch female NPT bulkhead outlet). This product is the RW configuration.
Specifications
TECHNICAL DRAWINGS & GUIDES
Technical drawings and product guides are available upon request. Contact us to request documents.
KEY SPECIFICATIONS
- Product Type: Vertical Rainwater Collection Tank
- Configuration: RW (Rainwater Collection)
- Material: G-90 Galvanized Steel (US-made)
- Construction: 20 gauge body and bottom, 22 gauge top, riveted assembly
- Interior Finish: Paint and epoxy lining. FDA approved for potable water. ANSI/NSF 61 certified.
- Capacity: 1,000 Gallons
- Manufacturer Dimensions: 5'6" x 5'8" (66" x 68"), measured to top of sidewall
- Shipping Dimensions: 68" diameter x 70" height (adds approximately 2 inches on each dimension for packaging). Note: installed fittings may extend 1 to 2 inches beyond these dimensions depending on fitting size and position.
- Estimated Weight (empty): 325 lbs
- Tank Shape: Cylindrical
- Tank Usability: Stationary
- Environment: Above Ground, Atmospheric
- Pressurized Use: No
- Fittings: Basket inlet, 3" or 4" overflow, and 3/4" female NPT bulkhead outlet (all poly bulkhead fittings, not welded metal).
- Potable Water: Yes, suitable for drinking water when installed and used as specified
- Expected Service Life: 20 to 30 years
- Warranty: 1-year manufacturer warranty
MODEL LEGEND
- WS = Water Storage configuration (two poly bulkhead fittings, one lower and one upper)
- RW = Rainwater Collection configuration (basket inlet, overflow, 3/4 inch female NPT bulkhead outlet)
SHIPPING INFORMATION
- Freight Class: 250
- Liftgate Option: Yes
- Ships From: Dripping Springs, Texas (ZIP 78620)
- Packaging Fee: $75 for tanks up to 1,000 gallons. For tanks over 1,000 gallons, contact us if palletizing is required.
- Shipping Dimensions: 68" diameter x 70" height (fittings may add 1 to 2 inches additional clearance)
