Images may be inaccurate. See specs below to ensure accuracy.
Product Description
The 10 gallon Peabody ProChem Solid Top Process Chemical Tank is the closed-cover version of Peabody's cylindrical process tank, fitted with a threaded twist lid for installations where a removable cover is not wanted. Everything else, from the calibration to the resin choice, matches the open top line.
Measuring 15" diameter x 21.68" high, this ProChem Solid Top Process Chemical Tank holds 10 gallons and opens through a 8 in lid.
MATERIAL OPTIONS
- LPE 1.5 — Part No.: 01-30354 (NSF/ANSI 61 certified resin)
- LPE 1.9 — Part No.: 01-34625 (NSF/ANSI 61 certified resin)
- XLPE — Part No.: 01-30410
- PPL — Part No.: 01-30365
- PVDF — Part No.: 01-30376
FEATURES
- Solid molded top with a threaded twist lid in place of a removable cover
- Same calibration, resin options and fitting layout as the open top tanks
- LPE certified to NSF/ANSI/CAN 61 in all sizes; XLPE from 55 to 500 gallons
- Also available in polypropylene and polyvinylidene fluoride (PVDF) on request
MATERIAL SELECTION GUIDANCE
Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.
These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.
CHEMICAL COMPATIBILITY RESOURCES
- Peabody Chemical Resistance Chart (PDF)
- Polyethylene Chemical Resistance Chart (PDF)
- Polypropylene Chemical Resistance Chart (PDF)
- Chemical Compatibility Tool
Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.
Specifications
KEY SPECIFICATIONS
- Product Type: ProChem Solid Top Process Chemical Tank
- Tank Shape: Cylindrical
- Pressurized Use: No
- Capacity: 10 Gallons
- Dimensions: 15" diameter x 21.68" high
- Material: LPE 1.5 (01-30354)
- Material: LPE 1.9 (01-34625)
- Material: XLPE (01-30410)
- Material: PPL (01-30365)
- Material: PVDF (01-30376)
- Color: Natural
- ANSI/NSF 61 Approved Resin: No
- Manufacturer: Peabody Engineering
- Manufacturer Part Number: 01-30354 / 01-34625 / 01-30410 / 01-30365 / 01-30376
SHIPPING INFORMATION
- Freight Class: 250
- Locations: Liberty, South Carolina
- Zip Codes: 29657
WARRANTY TERMS
Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.
Custom and Made to Order products are not returnable
